Welcome to Hong Kong Bitfoic Electronics Co., Ltd
Product
- Integrated Circuits (ICs)
Integrated Circuits (ICs)
- Audio Special Purpose
- Clock/Timing - Application Specific
- Clock/Timing - Clock Buffers, Drivers
- Clock/Timing - Clock Generators, PLLs, Frequency Synthesizers
- Clock/Timing - Delay Lines
- Clock/Timing - IC Batteries
- Clock/Timing - Programmable Timers and Oscillators
- Clock/Timing - Real Time Clocks
- Data Acquisition - ADCs/DACs - Special Purpose
- Data Acquisition - Analog Front End (AFE)
- Data Acquisition - Analog to Digital Converters (ADC)
- Data Acquisition - Digital Potentiometers
- Data Acquisition - Digital to Analog Converters (DAC)
- Data Acquisition - Touch Screen Controllers
- Embedded - CPLDs (Complex Programmable Logic Devices)
- Embedded - DSP (Digital Signal Processors)
- Embedded - FPGAs (Field Programmable Gate Array) with Microcontrollers
- Embedded - FPGAs (Field Programmable Gate Array)
- Embedded - Microcontroller, Microprocessor, FPGA Modules
- Embedded - Microcontrollers - Application Specific
- Embedded - Microcontrollers
- Embedded - Microprocessors
- Embedded - PLDs (Programmable Logic Device)
- Embedded - System On Chip (SoC)
- Capacitors
Capacitors
- Accessories
- Aluminum - Polymer Capacitors
- Aluminum Electrolytic Capacitors
- Capacitor Networks, Arrays
- Ceramic Capacitors
- Electric Double Layer Capacitors (EDLC), Supercapacitors
- Film Capacitors
- Mica and PTFE Capacitors
- Niobium Oxide Capacitors
- Silicon Capacitors
- Tantalum - Polymer Capacitors
- Tantalum Capacitors
- Thin Film Capacitors
- Trimmers, Variable Capacitors
- Discrete Semiconductor Devices
Discrete Semiconductor Devices
- Transistors - Bipolar (BJT) - Arrays, Pre-Biased
- Transistors - Special Purpose
- Transistors - Programmable Unijunction
- Transistors - JFETs
- Transistors - IGBTs - Single
- Transistors - IGBTs - Modules
- Transistors - IGBTs - Arrays
- Transistors - FETs, MOSFETs - Single
- Transistors - FETs, MOSFETs - RF
- Transistors - FETs, MOSFETs - Arrays
- Transistors - Bipolar (BJT) - Single, Pre-Biased
- Transistors - Bipolar (BJT) - Single
- Transistors - Bipolar (BJT) - RF
- Diodes - Bridge Rectifiers
- Transistors - Bipolar (BJT) - Arrays
- Thyristors - TRIACs
- Thyristors - SCRs
- Thyristors - SCRs - Modules
- Thyristors - DIACs, SIDACs
- Power Driver Modules
- Diodes - Zener - Single
- Diodes - Zener - Arrays
- Diodes - Variable Capacitance (Varicaps, Varactors)
- Diodes - Rectifiers - Single
- Connectors, Interconnects
Connectors, Interconnects
- Backplane Connectors - ARINC Inserts
- Backplane Connectors - ARINC
- Backplane Connectors - Accessories
- Backplane Connectors - Contacts
- Backplane Connectors - DIN 41612
- Backplane Connectors - Hard Metric, Standard
- Backplane Connectors - Housings
- Backplane Connectors - Specialized
- Banana and Tip Connectors - Accessories
- Banana and Tip Connectors - Adapters
- Banana and Tip Connectors - Binding Posts
- Banana and Tip Connectors - Jacks, Plugs
- Barrel - Accessories
- Barrel - Adapters
- Barrel - Audio Connectors
- Barrel - Power Connectors
- Between Series Adapters
- Blade Type Power Connectors - Accessories
- Blade Type Power Connectors - Contacts
- Blade Type Power Connectors - Housings
- Blade Type Power Connectors
- Card Edge Connectors - Accessories
- Card Edge Connectors - Adapters
- Card Edge Connectors - Contacts
- Sensors, Transducers
Sensors, Transducers
- Optical Sensors - Reflective - Analog Output
- Sensor Cable - Accessories
- Proximity/Occupancy Sensors - Finished Units
- Proximity Sensors
- Proximity Sensors - Industrial
- Pressure Sensors, Transducers
- Pressure Sensors, Transducers - Industrial
- Position Sensors - Angle, Linear Position Measuring
- Particle, Dust Sensors
- Optical Sensors - Reflective - Logic Output
- Sensor Cable - Assemblies
- Optical Sensors - Phototransistors
- Optical Sensors - Photonics - Counters, Detectors, SPCM (Single Photon Counting Module)
- Optical Sensors - Photointerrupters - Slot Type - Transistor Output
- Optical Sensors - Photointerrupters - Slot Type - Logic Output
- Optical Sensors - Photoelectric, Industrial
- Optical Sensors - Photodiodes
- Optical Sensors - Photo Detectors - Remote Receiver
- Optical Sensors - Photo Detectors - Logic Output
- Temperature Sensors - PTC Thermistors
- Ultrasonic Receivers, Transmitters
- Ultrasonic Receivers, Transmitters - Industrial
- Touch Sensors
- Temperature Sensors - Thermostats - Solid State
- Electronic Switches
Electronic Switches
- Keypad Switches
- Toggle Switches
- Thumbwheel Switches
- Tactile Switches
- Snap Action, Limit Switches
- Slide Switches
- Selector Switches
- Rotary Switches
- Rocker Switches
- Pushbutton Switches
- Pushbutton Switches - Hall Effect
- Programmable Display Switches
- Navigation Switches, Joystick
- Magnetic, Reed Switches
- Accessories - Boots, Seals
- Keylock Switches
- Interlock Switches
- Emergency Stop (E-Stop) Switches
- Disconnect Switch Components
- DIP Switches
- Configurable Switch Components - Lens
- Configurable Switch Components - Illumination Source
- Configurable Switch Components - Contact Block
- Configurable Switch Components - Body
- Optoelectronics Devices
Optoelectronics Devices
- Laser Diodes, Laser Modules - Laser Delivery, Laser Fibers
- LED Lighting - Color
- LED Lighting - White
- LED Lighting Kits
- LED Thermal Products
- LEDs - Circuit Board Indicators, Arrays, Light Bars, Bar Graphs
- LEDs - Lamp Replacements
- LEDs - Spacers, Standoffs
- Lamps - Cold Cathode Fluorescent (CCFL) & UV
- Lamps - Incandescents, Neons
- Laser Diodes, Laser Modules - Accessories
- LED Lighting - COBs, Engines, Modules, Strips
- Laser Diodes, Laser Modules
- Lighting Fixtures
- Optics - Lenses
- Optics - Light Pipes
- Optics - Reflectors
- Optics - Remote Phosphor Light Source
- Optomechanical
- Panel Indicators, Pilot Lights
- Touch Screen Overlays
- Xenon Lighting
- Fiber Optics - Receivers
- Ballasts, Inverters
- RF & RFID Devices
RF & RFID Devices
- RFI and EMI - Shielding and Absorbing Materials
- RF Receiver, Transmitter, and Transceiver Finished Units
- RF Receivers
- RF Shields
- RF Switches
- RF Transceiver ICs
- RF Transceiver Modules and Modems
- RF Transmitters
- RFI and EMI - Contacts, Fingerstock and Gaskets
- RF Power Dividers/Splitters
- RFID Accessories
- RFID Antennas
- RFID Evaluation and Development Kits, Boards
- RFID Reader Modules
- RFID Transponders, Tags
- RFID, RF Access, Monitoring ICs
- Subscriber Identification Module (SIM) Cards
- Attenuators
- RF Power Controller ICs
- RF Multiplexers
- RF Modulators
- RF Mixers
- RF Misc ICs and Modules
- RF Front End (LNA + PA)
- Circuit Protection Devices
Circuit Protection Devices
- Lighting Protection
- Thermal Cutoffs (Thermal Fuses and Breakers)
- TVS - Varistors, MOVs
- TVS - Thyristors
- TVS - Surge Protection Devices (SPDs)
- TVS - Mixed Technology
- TVS - Diodes
- Surge Suppression ICs
- PTC Resettable Fuses
- Accessories
- Inrush Current Limiters (ICL)
- Ground Fault Circuit Interrupter (GFCI)
- Gas Discharge Tube Arresters (GDT)
- Fuses
- Fuseholders
- Electrical, Specialty Fuses
- Circuit Breakers
Manufacturers:
No data
- Product Status
- Active
- Last Time Buy
- Obsolete
- Features
- -
- 0.5 ~ 4.4 in-lbs (0.05 ~ 0.5Nm) Torque, Audible Click, Ergonomic, ESD Safe, Includes C of C
- 0.9 ~ 5.3 in-lbs (0.1 ~ 0.6Nm) Torque, Ergonomic, ESD Safe
- 0.9 ~ 5.3 in-lbs (0.1 ~ 0.6Nm) Torque, Ergonomic, Includes C of C, Soft Grip
- 1.8 in-lbs (0.2Nm) Torque, Chrome Finish
- 1.8 in-lbs (0.2Nm) Torque, Chrome Finish, ESD Safe
- 10 in-lbs (1.1Nm) Torque, Soft Grip
- 10 ~ 50 in-lbs (1.1 ~ 5.6Nm) Torque, Audible Click, Ergonomic, Insulated to 1000V
- 10 ~ 50 in-lbs (1.1 ~ 5.7Nm) Torque, Audible Click, Ergonomic, Includes Blade Holder, Includes C of C, Insulated to 1000V
- 10 ~ 50 in-lbs (1.1 ~ 5.7Nm) Torque, Ergonomic, Insulated to 1000V
- 10 ~ 50 in-lbs (1.1 ~ 5.7Nm) Torque, Ergonomic, Soft Grip
- 10.6 in-lbs (1.2Nm) Torque
- 10.6 in-lbs (1.2Nm) Torque, Audible Click, Ergonomic, Soft Grip
- 10.6 in-lbs (1.2Nm) Torque, Audible Click, Includes C of C
- 10.6 ~ 26.6 in-lbs (1.2 ~ 3Nm) Torque, Non-Slip, Quick Release
- 106.2 in-lbs (12Nm) Torque, Ergonomic, Includes C of C, T-Handle
- 11.5 in-lbs (1.3Nm) Torque, Chrome Finish
- 11.5 in-lbs (1.3Nm) Torque, Chrome Finish, ESD Safe
- 11.5 in-lbs (1.3Nm) Torque, Chrome Finish, Screw Holding
- 110.6 in-lbs (12.5Nm) Torque, Ergonomic, Includes C of C, T-Handle
- 12.4 in-lbs (1.4Nm) Torque
- 12.4 in-lbs (1.4Nm) Torque, Audible Click, Ergonomic, Soft Grip
- 12.4 in-lbs (1.4Nm) Torque, Audible Click, Includes C of C
- 12.5 in-lbs (1.4Nm) Torque, Soft Grip
- 123.9 in-lbs (14Nm) Torque, Ergonomic, Includes C of C, T-Handle
- 15 in-lbs (1.7Nm) Torque, Soft Grip
- 15 ~ 80 in-oz (0.1 ~ 0.56Nm) Torque, Ergonomic, Includes Adapter Blade
- 15.9 in-lbs (1.8Nm) Torque, Chrome Finish
- 150 in-lbs (16.9Nm) Torque, Ergonomic, ESD Safe, Impact Resistant, T-Handle
- 17.5 ~ 70 in-lbs (2 ~ 7.9Nm), Audible Click, Includes C of C, Soft Grip
- 17.7 in-lbs (2Nm) Torque
- 17.7 in-lbs (2Nm) Torque, Audible Click, Ergonomic, Soft Grip
- 17.7 in-lbs (2Nm) Torque, Audible Click, Includes C of C
- 17.7 in-lbs (2Nm) Torque, Chrome Finish
- 17.7 in-lbs (2Nm) Torque, Chrome Finish, Screw Holding
- 17.7 ~ 61.9 in lbs (2 ~ 7Nm) Torque, Audible Click, C of C, Ergonomic, Soft Grip
- 17.7 ~ 62 in-lbs (2 ~ 7Nm) Torque, Audible Click, Ergonomic, Insulated to 1000V
- 17.7 ~ 70.8 in-lbs (2 ~ 8Nm) Torque, Adjustment Tool, Plastic Case, Replaceable Blades
- 17.7 ~ 70.8 in-lbs (2 ~ 8Nm) Torque, Audible Click, Ergonomic, Includes Blade Holder, Includes C of C, Insulated to 1000V
- 17.7 ~ 70.8 in-lbs (2 ~ 8Nm) Torque, Ergonomic, Includes C of C, Soft Grip
- 17.7 ~ 70.8 in-lbs (2 ~ 8Nm), Audible Click, C of C, Insulated to 1000V, Non-Magnetic, Pistol Grip, Soft Grip
- 18 ~ 26 in-lbs (2 ~ 7Nm) Torque, Audible Click, Ergonomic, Insulated to 1000V
- 2.7 in-lbs (0.3Nm) Torque, Chrome Finish
- 2.7 ~ 10.6 in-lbs (0.3 ~ 1.2Nm) Torque, Non-Slip, Quick Release
- 20 in-lbs (2.3Nm) Torque, Soft Grip
- 20 ~ 70 in-lbs (2.3 ~ 7.9Nm) Torque, Audible Click, Ergonomic, Includes Blade Holder, Includes C of C, Insulated to 1000V
- 20 ~ 70 in-lbs (2.3 ~ 7.9Nm) Torque, Ergonomic, Insulated to 1000V
- 20 ~ 70 in-lbs (2.3 ~ 7.9Nm) Torque, Ergonomic, Soft Grip
- 22 in-lbs (2.5Nm) Torque, Audible Click, Ergonomic, Soft Grip
- 22.1 in-lbs (2.5Nm) Torque
- 22.1 in-lbs (2.5Nm) Torque, Audible Click, Includes C of C
- 22.1 in-lbs (2.5Nm) Torque, Chrome Finish
- 22.1 in-lbs (2.5Nm) Torque, Chrome Finish, ESD Safe
- 22.1 in-lbs (2.5Nm) Torque, Chrome Finish, Screw Holding
- 22.1 in-lbs (2.5Nm) Torque, Insulated to 1000V
- 25 in-lbs (2.8Nm) Torque, Soft Grip
- 26.6 in-lbs (3Nm) Torque
- 26.6 in-lbs (3Nm) Torque, Audible Click, Includes C of C
- 26.6 in-lbs (3Nm) Torque, Chrome Finish
- 26.6 in-lbs (3Nm) Torque, Chrome Finish, Screw Holding
- 26.6 in-lbs (3Nm) Torque, Soft Grip
- 26.6 ~ 53.1 in-lbs (3 ~ 6Nm) Torque, Quick Release, Non-Slip
- 3.5 in-lbs (0.4Nm) Torque, Chrome Finish
- 3.5 in-lbs (0.4Nm) Torque, Chrome Finish, ESD Safe
- 3.5 ~ 8.8 in-lbs (0.4 ~ 1.0Nm) Torque, Ergonomic, Includes C of C, Soft Grip
- 3.7 ~ 13.1 in-lbs (0.4 ~ 1.5Nm) Torque, Audible Click, Auto Shut off, Digital, Includes Bit Holder
- 3.7 ~ 13.1 in-lbs (0.4 ~ 1.5Nm) Torque, Audible Click, Auto Shut off, Digital, Includes Bit Holder, Includes C of C
- 30 in-lbs (3.4Nm) Torque, Soft Grip
- 33.6 in-lbs (3.8Nm) Torque, Audible Click, Includes C of C
- 33.6 in-lbs (3.8Nm) Torque, Chrome Finish
- 33.6 in-lbs (3.8Nm) Torque, Chrome Finish, ESD Safe
- 33.6 in-lbs (3.8Nm) Torque, Chrome Finish, Screw Holding
- 33.6 in-lbs (3.8Nm) Torque, Ergonomic, Soft Grip
- 33.6 in-lbs (3.8Nm) Torque, Insulated to 1000V
- 35 in-lbs (4Nm) Torque, Soft Grip
- 35.4 in-lbs (4Nm) Torque, Audible Click, Includes C of C
- 35.4 in-lbs (4Nm) Torque, Ergonomic, Soft Grip
- 39.8 in-lbs (4.5Nm) Torque, Chrome Finish
- 39.8 in-lbs (4.5Nm) Torque, Chrome Finish, Screw Holding
- 39.8 in-lbs (4.5Nm) Torque, Ergonomic, Soft Grip
- 4.4 in-lbs (0.5Nm) Torque
- 4.4 in-lbs (0.5Nm) Torque, Audible Click, Includes C of C
- 4.4 in-lbs (0.5Nm) Torque, Chrome Finish
- 4.4 ~ 15 in-lbs (0.5 ~ 1.7Nm) Torque, Adjustment Tool, Insulated to 1000V, Replaceable Blades
- 4.4 ~ 15 in-lbs (0.5 ~ 1.7Nm) Torque, Adjustment Tool, Plastic Case, Replaceable Blades
- 4.4 ~ 17.7 in-lbs (0.5 ~ 2Nm) Torque, Audible Click, Ergonomic, Insulated to 1000V
- 4.4 ~ 17.7 in-lbs (0.5 ~ 2Nm) Torque, Ergonomic, Includes C of C, Soft Grip
- 40 in-lbs (4.52Nm) Torque, Soft Grip
- 44.2 in-lbs (5Nm) Torque, Ergonomic, Soft Grip
- 44.3 ~ 123.9 in-lbs (5 ~ 14Nm) Torque, Ergonomic, Includes C of C, T-Handle
- 48.7 in-lbs (5.5Nm) Torque, Chrome Finish
- 48.7 in-lbs (5.5Nm) Torque, Chrome Finish, Screw Holding
- 48.7 in-lbs (5.5Nm) Torque, Insulated to 1000V
- 5 in-lbs (0.6Nm) Torque, Soft Grip
- 5 ~ 10 in-lbs (0.6 ~ 1.1Nm) Torque, Ergonomic, ESD Safe
- 5 ~ 17 in-lbs (0.6 ~ 1.9Nm) Torque, Audible Click, Ergonomic, Includes Blade Holder, Includes C of C, Insulated to 1000V
- 5 ~ 18 in-lbs (0.6 ~ 2Nm) Torque, Adjustable, ESD Safe
- 5 ~ 18 in-lbs (0.6 ~ 2Nm) Torque, Audible Click, Ergonomic, Insulated to 1000V
- 5.3 in-lbs (0.6Nm) Torque
- 5.3 in-lbs (0.6Nm) Torque, Audible Click, Includes C of C
- 5.3 in-lbs (0.6Nm) Torque, Audible Click, Soft Grip
- 5.3 in-lbs (0.6Nm) Torque, Chrome Finish
- 5.3 in-lbs (0.6Nm) Torque, Chrome Finish, ESD Safe
- 5.3 in-lbs (0.6Nm) Torque, Chrome Finish, Screw Holding
- 5.3 in-lbs (0.6Nm) Torque, Insulated to 1000V
- 5.3 ~ 17.7 in-lbs (0.6 ~ 2Nm) Torque, Audible Click, Ergonomic, Includes Blade Holder, Includes C of C, Insulated to 1000V
- 5.3 ~ 9.7 in-lbs (0.6 ~ 1.1Nm) Torque, Ergonomic
- 50 in-lbs (5.6Nm) Torque, Soft Grip
- 53.1 in-lbs (6Nm) Torque, Ergonomic, Includes C of C, T-Handle
- 58.4 in-lbs (6.6Nm) Torque, Chrome Finish
- 58.4 in-lbs (6.6Nm) Torque, Chrome Finish, Screw Holding
- 60 in-lbs (6.8Nm) Torque, Soft Grip
- 7 ~ 26 in-lbs (0.8 ~ 2.9Nm) Torque, Audible Click, Auto Shut off, Digital, Includes Bit Holder, Includes C of C
- 7.1 in-lbs (0.8Nm) Torque, Chrome Finish
- 7.1 in-lbs (0.8Nm) Torque, Chrome Finish, Screw Holding
- 7.1 ~ 44.3 in lbs (0.8 ~ 5Nm) Torque, Ergonomic, Includes C of C, Soft Grip
- 7.5 in-lbs (0.8Nm) Torque, Soft Grip
- 7.5 ~ 20 in-lbs (0.8 ~ 2.3Nm) Torque, Ergonomic, ESD Safe
- 7.5 ~ 20 in-lbs (0.8 ~ 2.3Nm) Torque, Ergonomic, Insulated to 1000V
- 7.5 ~ 20 in-lbs (0.8 ~ 2.3Nm) Torque, Ergonomic, Soft Grip
- 70 in-lbs (7.9Nm) Torque, Soft Grip
- 70.8 in-lbs (8Nm) Torque, Chrome Finish
- 70.8 in-lbs (8Nm) Torque, Chrome Finish, Screw Holding
- 70.8 in-lbs (8Nm) Torque, Ergonomic, Includes C of C, T-Handle
- 8 in-lbs (0.9Nm) Torque
- 8 in-lbs (0.9Nm) Torque, Audible Click, Includes C of C
- 8 in-lbs (0.9Nm) Torque, Chrome Finish
- 8 in-lbs (0.9Nm) Torque, Chrome Finish, ESD Safe
- 8 in-lbs (0.9Nm) Torque, Chrome Finish, Screw Holding
- 8 in-lbs (0.9Nm) Torque, Insulated to 1000V
- 8.9 ~ 44.3 in-lbs (1 ~ 5Nm) Torque, Audible Click, Ergonomic, Includes Blade Holder, Includes C of C, Insulated to 1000V
- 8.9 ~ 44.3 in-lbs (1 ~ 5Nm) Torque, Audible Click, Ergonomic, Insulated to 1000V
- 88.5 in-lbs (10Nm) Torque, Ergonomic, Includes C of C, T-Handle
- 9 ~ 45 in-lbs (1 ~ 6Nm) Torque, Audible Click, Auto Shut off, Digital, Includes Bit Holder, Includes
- 9 ~ 45 in-lbs (1 ~ 6Nm) Torque, Audible Click, Auto Shut off, Digital, Includes Bit Holder, Includes C of C
- 9 ~ 50 in-lbs (1 ~ 5.6Nm) Audible Click, Auto Shut off, Digital, Includes Bit Holder, Includes C of C
- 9.7 in-lbs (1.1Nm) Torque
- 9.7 in-lbs (1.1Nm) Torque, Audible Click, Ergonomic, Soft Grip
- 9.7 in-lbs (1.1Nm) Torque, Audible Click, Includes C of C
- 9.7 in-lbs (1.1Nm) Torque, Chrome Finish
- 9.7 in-lbs (1.1Nm) Torque, Chrome Finish, ESD Safe
- 9.7 in-lbs (1.1Nm) Torque, Insulated to 1000V
- Adjustable Length, Collet Lock, Free Turning Cap
- Adjustable Length, Ergonomic, Non-Slip, Oil and Chemical Resistant
- Adjustable Length, ESD Safe, Ergonomic, Impact Resistant, Non-Slip, Soft Grip
- Adjustable Length, Magnetic, Soft Grip
- Adjustable, Reversible
- Anti-Cam Out
- Anti-Cam Out, Ball End, Impact Resistant
- Anti-Cam Out, Black Tip, Insulated to 1000V, Narrow Tip
- Anti-Cam Out, Carbide Coated
- Anti-Cam Out, Diamond Coated
- Anti-Cam Out, Impact Resistant
- Anti-Cam Out, Impact Resistant, Screw Holding
- Ball End
- Ball End, Chamfered End
- Ball End, Chrome Finish
- Ball End, Impact Resistant
- Ball End, Screw Holding
- Ball Retainer, ESD Safe, Free Turning Cap, Impact Resistant
- Ball Retainer, Free Turning Cap, Impact Resistant
- Bit Storage
- Bit Storage, Handle, Magnetic
- Bit Storage, Ratcheting, Soft Grip
- Black Finish
- Black Finish, Insulated to 1000V, Soft Grip
- Black Tip, Includes Blade holder, Insulated to 1000V, Narrow Tip, Quick Release
- Black Tip, Insulated to 1000V, Narrow Tip
- Cabinet Tip, Reversible
- Chamfered End, Impact Resistant
- Chrome Finish
- Chrome Finish, ESD Safe
- Chrome Finish, Magnetic
- Chrome Finish, Quick Release
- Chrome Finish, Soft Grip
- Collet Lock, ESD Safe, Free Turning Cap, Impact Resistant
- Collet Lock, ESD Safe, Impact Resistant
- Collet Lock, Impact Resistant
- Demagnetizer, Magnetizer, Soft Grip
- Dissipative, ESD Safe, Soft Grip
- Dissipative, ESD Safe, Soft Grip, Stubby
- Drywall Stop
- Ergonomic, ESD Safe, Impact Resistant
- Ergonomic, Flexible Shaft, Retaining Ring, Soft Grip
- Ergonomic, Free Turning Cap, Magnetic, Nickel Plated
- Ergonomic, Impact Resistant
- Ergonomic, Impact Resistant, Magnetic, Nickel Plated
- Ergonomic, Impact Resistant, Soft Grip
- Ergonomic, Insulated to 1000V, Quick Release, Soft Grip
- Ergonomic, Magnetic
- Ergonomic, Magnetic, Nickel Plated, Soft Grip
- Ergonomic, Magnetic, Soft Grip
- Ergonomic, Quick Release, Soft Grip
- Ergonomic, Soft Grip
- ESD Safe, Quick Release, Soft Grip
- ESD Safe, Soft Grip
- Flexible Shank
- Free Turning Cap, Holds 6 Bits, Impact Resistant, Insulated to 1000V, Magnetic
- Free Turning Cap, Holds 6 Bits, Impact Resistant, Magnetic
- Hollow Shaft, Impact Resistant, Magnetic, Quick Connect
- Impact Resistant
- Impact Resistant, Magnetic
- Impact Resistant, Magnetic, Nickel Plated, Non-Slip, Oil and Grease Resistant, Soft Grip
- Impact Resistant, Magnetic, Nickel Plated, T-Handle
- Impact Resistant, Magnetic, Quick Release
- Impact Resistant, Screw Holding
- Impact Resistant, Soft Grip
- Impact Resistant, Tapered
- Includes Adapter, Insulated to 1000V, Non-Magnetic, Pistol Grip, Ratcheting, Soft Grip
- Insulated to 1000V
- Insulated to 1000V, Soft Grip, Stubby
- Magnetic
- Magnetic, Quick Connect
- Magnetic, Quick Release
- Magnetic, Retaining Ring
- Magnetic, Screw Cap
- Magnetic, Soft Grip, Stubby
- Nickel Plated
- Non-Magnetic
- Pilot Tip
- Quick Release
- Ratcheting
- Ratcheting, Reversible
- Ratcheting, Reversible, T-Handle
- Retaining Ring
- Reversible
- Reversible, Screw Cap
- Screw Holding
- Soft Grip
- Stepped Blade
- Stubby
- T-Handle
- Tapered
- TiN (Titanium Nitride) Coated
- Length - Overall
- -
- 0.16" (4.0mm)
- 0.79" (20.0mm)
- 0.98" (25.0mm)
- 0.984" (25.00mm)
- 1.00" (25.4mm)
- 1.00" (25.5mm)
- 1.10" (28.0mm)
- 1.14" (29.0mm)
- 1.18" (30.0mm)
- 1.20" (30.5mm)
- 1.25" (31.8mm)
- 1.26" (32.0mm)
- 1.32" (33.5mm)
- 1.38" (35.0mm)
- 1.41" (35.8mm)
- 1.50" (38.0mm)
- 1.54" (39.0mm)
- 1.57" (39.9mm)
- 1.61" (41.0mm)
- 1.65" (42.0mm)
- 1.73" (43.9mm)
- 1.73" (44.0mm)
- 1.75" (44.5mm)
- 1.85" (47.0mm)
- 1.88" (47.76mm)
- 1.90" (48.3mm)
- 1.93" (49.0mm)
- 1.969" (50.00mm)
- 1.97" (50.0mm)
- 10.07" (256.0mm)
- 10.60" (268.0mm)
- 11.30" (287.0mm)
- 12.00" (304.8mm)
- 15.75" (400.0mm)
- 2.00" (50.8mm)
- 2.13" (54.0mm)
- 2.17" (55.0mm)
- 2.20" (56.0mm)
- 2.24" (57.0mm)
- 2.25" (57.2mm)
- 2.32" (59.0mm)
- 2.36" (60.0mm)
- 2.38" (60.5mm)
- 2.40" (61.0mm)
- 2.44" (62.0mm)
- 2.50" (63.5mm)
- 2.56" (65.0mm)
- 2.64" (67.0mm)
- 2.65" (67.3mm)
- 2.7" (68.0mm)
- 2.76" (70.0mm)
- 2.91" (74.0mm)
- 2.95" (75.0mm)
- 25.00mm
- 3.00" (76.2mm)
- 3.13" (79.5mm)
- 3.15" (80.0mm)
- 3.180" (80.78mm)
- 3.50" (88.9mm)
- 3.50" (89.0mm)
- 3.54" (90.0mm)
- 3.62" (92.0mm)
- 3.70" (94.0mm)
- 3.74" (95.0mm)
- 3.90" (99.1mm)
- 3.94" (100.0mm)
- 4.00" (101.6mm)
- 4.00" (102.0mm)
- 4.00" (103.00mm)
- 4.00" ~ 8.00" (101.6mm ~ 203.2mm)
- 4.02" (102.0mm)
- 4.06" (103.0mm)
- 4.13" (105.0mm)
- 4.21" (107.0mm)
- 4.25" (108.0mm)
- 4.29" (109.0mm)
- 4.33" (110.0mm)
- 4.41" (112.0mm)
- 4.50" (114.3mm)
- 4.53" (115.0mm)
- 4.56" (115.8mm)
- 4.69" (119.0mm)
- 4.72" (120.0mm)
- 4.74" (120.3mm)
- 4.80" (122.0mm)
- 4.80" ~ 5.00" (122.0mm ~ 127.0mm)
- 4.88" (124.0mm)
- 4.92" (125.0mm)
- 4.96" (126.0mm)
- 4.96" ~ 5.16" (126.0mm ~ 131.0mm)
- 5.00" (127.0mm)
- 5.10" (129.5mm)
- 5.12" (130.0mm)
- 5.13" (130.3mm)
- 5.16" (131.0mm)
- 5.20" (132.0mm)
- 5.24" ~ 5.43" (133.0mm ~ 138.0mm)
- 5.25" (133.4mm)
- 5.28" (134.0mm
- 5.28" (134.0mm)
- 5.30" (134.6mm)
- 5.31" (135.0mm)
- 5.38" (136.5mm)
- 5.39" ~ 5.59" (137.0mm ~ 142.0mm)
- 5.40" (137.2mm)
- 5.43" (138.0mm)
- 5.51" (140.0mm)
- 5.55" (141.0mm)
- 5.59" (142.0mm)
- 5.79" (147.00mm)
- 5.83" (148.0mm)
- 5.87" (149.0mm)
- 5.88" (149.4mm)
- 5.91" (150.0mm)
- 5.98" (152.0mm)
- 6.00" (152.0mm)
- 6.00" (152.4mm)
- 6.10" (155.0mm)
- 6.25" (158.8mm)
- 6.26" (159.0mm)
- 6.30" (160.0mm)
- 6.34" (161.0mm)
- 6.38" (162.0mm)
- 6.50" (164.0mm)
- 6.69" (170.0mm)
- 6.89" (175.0mm)
- 7.00" (177.8mm)
- 7.09" (180.0mm)
- 7.40" (188.0mm)
- 7.48" (190.0mm)
- 7.72" (196.0mm)
- 7.75" (196.9mm)
- 7.87" (200.0mm)
- 8.00" (203.2mm)
- 8.31" (211.0mm)
- 9.00" (228.6mm)
- 9.06" (230.0mm)
- 9.13" (232.0mm)
- 9.25" (235.0mm)
- 9.45" (240.0mm)
- 9.57" (243.0mm)
- 9.96" (253.0mm)
- Quantity
- -
- 1
- 10
- 100
- 11
- 144
- 15
- 2
- 25
- 3
- 30
- 5
- 50
- 6
- Tip Type
- -
- 90° Countersink
- Bristol (4 Spline)
- Bristol (6 Spline)
- Clutch
- Combination
- Drill Bit
- Flat, Hex, Hex TR (Security), Pentalobe, Phillips, Square, Torx®, Torx® TR (Security), Triangle
- Hex
- Hex Socket
- Hex TR (Security)
- Hex, Phillips
- Pentalobe
- Pentalobe TR (Security)
- Phillips
- Phillips, Slotted
- Phillips, Slotted, Square
- Phillips, Slotted, Xeno
- Phillips, Square
- Pozidriv®
- Pozidriv®, Slotted, Xeno
- Schrader® Valve
- Schrader® Valve, Core Removal
- Schrader® Valve, Slotted
- Slotted
- Slotted, Square
- Spanner
- Spanner (Security)
- Spline
- Square
- Torq-Set®
- TorxPlus®
- Torx®
- Torx® TR (Security)
- Tri-Wing®
- Triangle Socket
- Triple Square
- Xeno
- Tool Type
- -
- Bit Holder
- Bit, Double Ended
- Bit, Insert
- Bit, Micro
- Bit, Power
- Bit, Screwdriver
- Blade
- Blade Holder
- Blade, Double Ended
- Blade, Holder
- Guide Pin, Bushing
- Handle
- Handle, Bit Holding
- Handle, Blade Holding
- Handle, Torque
- Nut Setter
- Nut Setter, Micro
- Tip Size
- #0
- #0, #1
- #0, #3
- #0, 3/32"
- #0, 3mm
- #00
- #00, 1/8"
- #00, 2mm
- #000
- #000, #00
- #000, 1.5mm
- #1
- #1, #2
- #1, #2, 1/4", 3/16"
- #1, 1/4"
- #1, 3/16"
- #1, 4.5mm
- #1, 4mm
- #10
- #10, #12
- #10, #15
- #12
- #2
- #2, #2
- #2, #3
- #2, #4
- #2, 1/4"
- #2, 3/16"
- #2, 5.5mm
- #2, 6mm
- #2, 9/32"
- #2.2
- #2.6
- #20, #25
- #27, #30
- #3
- #3, 6.5mm
- #3, 7mm
- #4
- #4, #5
- #5
- #6
- #6, #8
- #8
- #9
- -
- 0.028"
- 0.035"
- 0.05"
- 0.06"
- 0.07"
- 0.076"
- 0.10"
- 0.255mm x 1.2mm
- 0.315mm x 1.6mm
- 0.393mm x 1.6mm
- 0.45x2.4mm
- 0.472mm x 2.0mm
- 0.4mm x 2.5mm
- 0.5mm x 3mm
- 0.5mm x 4mm
- 0.6mm x 3.5mm
- 0.6mm x 3mm
- 0.6mm x 4.5mm
- 0.7mm
- 0.8mm
- 0.8mm x 4mm
- 0.8mm x 4mm, 1mm x 6mm
- 0.8mm x 5.5mm
- 0.9mm
- 0.9mm x 6.5mm
- 0.9mm, 1.3mm
- 1.27mm
- 1.2mm
- 1.2mm x 6.5mm
- 1.2mm x 8mm
- 1.3mm
- 1.5mm
- 1.5mm, 1.8mm
- 1.5mm, 2mm
- 1.5mm, 3mm
- 1.6mm x 10.0mm
- 1.6mm x 8mm
- 1.8mm
- 1/16"
- 1/16", 5/64"
- 1/2"
- 1/4"
- 1/8"
- 1/8", 9/64"
- 10.4mm
- 100mm
- 102mm
- 104mm
- 10mm
- 11/32"
- 11mm
- 12.4mm
- 122mm
- 12mm
- 13mm
- 14.5mm
- 142mm
- 14mm
- 150mm
- 15mm
- 16.5mm
- 16mm
- 17mm
- 19mm
- 1mm
- 1mm x 4mm
- 1mm x 5.5mm
- 2.0mm x 12.0mm
- 2.4"
- 2.5mm
- 2.5mm, 3mm
- 2.5mm, 4mm
- 2.8mm
- 20.5mm
- 20mm
- 22mm
- 23mm
- 25.5mm
- 27mm
- 2mm
- 2mm, 2.5mm
- 2mm, 3.5mm
- 3.2mm
- 3.5mm
- 3.5mm, 4.5mm
- 3.8mm
- 3.9"
- 3/16"
- 3/16", 1/4"
- 3/32"
- 3/32", 7/64"
- 3/8"
- 32mm
- 3mm
- 3mm, 4.5mm
- 3mm, 4mm
- 4.0mm x 4.0mm
- 4.5mm
- 4.7mm
- 4mm
- 4mm, 5mm
- 4mm, 6mm
- 5.5mm
- 5.5mm x 6.0mm
- 5.5mm, 6.5mm
- 5.9"
- 5/16"
- 5/32"
- 5/32", 3/16"
- 5/64"
- 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4"
- 52mm
- 5mm
- 5mm, 6mm
- 6.3mm
- 6.5mm
- 6.5mm x 6.0mm
- 60mm
- 62mm
- 63mm
- 67mm
- 6mm
- 7.5mm
- 7.9"
- 7/16"
- 7/32"
- 7/32", 1/4"
- 7/64"
- 7mm
- 8.3mm
- 8.5mm
- 80mm
- 82mm
- 8mm
- 8mm x 10mm
- 9.9"
- 9/16"
- 9/32"
- 9/64"
- 9mm
- IP1
- IP10
- IP15
- IP2
- IP20
- IP25
- IP27
- IP3
- IP30
- IP4
- IP40
- IP5
- IP6
- IP7
- IP8
- IP9
- M3
- M4
- M5
- M6
- M8
- P2
- P5
- P6
- PL1
- PL2
- PL3
- PL4
- PL5
- PL6
- PLS10
- PLS15
- PLS20
- PLS25
- PLS27
- PLS30
- PLS40
- PLS8
- PZ0
- PZ1
- PZ2
- PZ3
- S1, S2
- SW2
- SW2.5
- T1
- T1, T2
- T10
- T10, T15
- T10H
- T10s
- T10s, T15s
- T15
- T15, T20
- T15s
- T2
- T20
- T20, T25
- T20s
- T20s, T25s
- T25
- T25, T27
- T25s
- T27
- T27, T30
- T27s
- T3
- T3, T4
- T30
- T30, T40
- T30s
- T30s, T40s
- T4
- T40
- T40s
- T45
- T45s
- T5
- T5, T6
- T50
- T50s
- T55
- T55s
- T6
- T6, T7
- T6, T8
- T6s, T8s
- T7
- T7, T10
- T7, T9
- T7S
- T7s, T9s
- T8
- T8, T10
- T8, T15
- T8, T9
- T8s
- T9
- T9s
- TR10
- TR15
- TR20
- TR25
- TR27
- TR30
- TR35
- TR40
- TR6
- TR7
- TR8
- TR9
- TT15, TT20
- TT25, TT27
- TT7, TT8
- TT9, TT10
- Y00
- Y000
- Y1
- Drive Size
- -
- 1"
- 1/2"
- 1/4"
- 10mm
- 11/32"
- 11mm
- 12mm
- 14"
- 3/16"
- 3/4"
- 3/8"
- 4mm
- 5/16"
- 5/32"
- 6.35mm
- 6mm
- 7/16"
- 7mm
- 8mm
- 9mm
Categories
Screw and Nut Drivers - Bits, Blades and Handles
- 9961N
Apex Tool Group
BLADE BRISTOL 0.05" 4"
Price: NA - 9920N
Apex Tool Group
BLADE HEX 1.27MM 4.02"
Price: NA - 99821BKN
Apex Tool Group
BLADE PHILLIPS SZ1 4"
Price: NA - 9962N
Apex Tool Group
BLADE BRISTOL 1.5MM 4"
Price: NA - 99125N
Apex Tool Group
BLADE SLOTTED 1/8" 4"
Price: NA - 99822N
Apex Tool Group
BLADE PHILLIPS SZ2 4"
Price: NA - 99820N
Apex Tool Group
BLADE PHILLIPS SZ0 4"
Price: NA - 9973MMN
Apex Tool Group
BLADE HEX 2MM 4"
Price: NA - 9972MMN
Apex Tool Group
BLADE HEX 1.5MM 4"
Price: NA - 994N
Apex Tool Group
HANDLE BLADE HOLDING 3.5"
Price: NA - 9923BPN
Apex Tool Group
BLADE HEX 3/32" 4"
Price: NA - 994RN
Apex Tool Group
HANDLE BLADE HOLDING 3.5"
Price: NA - 9976MMN
Apex Tool Group
BLADE HEX 4MM 4"
Price: NA - 9910MMN
Apex Tool Group
BLADE HEX SOCKET 10MM 4.56"
Price: NA - 9920BPN
Apex Tool Group
BLADE HEX 0.05" 4"
Price: NA - 999MMN
Apex Tool Group
BLADE HEX SOCKET 9MM 4.56"
Price: NA - 81128
Apex Tool Group
HDL SPIN 1/4DR
Price: NA - 9920BKN
Apex Tool Group
BLADE HEX 0.05" 4"
Price: NA - 412406
Apex Tool Group
INSERT BIT SLT 5/16 SLO TTED 6/8
Price: NA - 412410
Apex Tool Group
INSERT BIT SLT 5/16 SLO TTED
Price: NA
SUPPORT
ABOUT BITFOIC
QUICK LINKS
Connect with us
Tel: 86-755-23606554
E-mail: [email protected]
Address: Room A29, 24 / F, Hoi Tak Wai, Prince Edward industrial building, 706 Prince Edward Road East, San Po Kong, Kowloon,Hongkong
Mon-Fri: 09.30 AM - 18.30 PM
We Accept Payment Via
We support logistics
Copyright © 2022 Hong Kong Bitfoic Electronics Co., Ltd
Bitfoic uses cookies to help deliver a better online experience. You can see what cookies we serve and how to set your preferences in our
Cookies Policy
,
if you agree on our use of cookies please click continue. When browsing and using our website, Bitfoic also collects, stores and/or processes personal data, please read our
Term & Condition
and
Privacy Policy
to find out more.
CONTINUE