M5LV-512/120-7YI FPGAs Overview
The MACH 5 family consists of a broad range of high-density and high-I/O Complex
Programmable Logic Devices (CPLDs). The fifth-generation MACH architecture yields fast speeds
at high CPLD densities, low power, and supports additional features such as in-system
programmability, Boundary Scan testability, and advanced clocking options . The MACH
5 family offers 5-V (M5-xxx) and 3.3-V (M5LV-xxx) operation.
Manufactured in state-of-the-art ISO 9000 qualified fabrication facilities on E2CMOS process
technologies, MACH 5 devices are available with pin-to-pin delays as fast as 5.5 ns . The
5.5, 6.5, 7.5, 10, and 12-ns devices are compliant with the PCI Local Bus Specification.
With Lattice’s unique hierarchical architecture, the MACH 5 family provides densities up to 512
macrocells to support full system logic integration. Extensive routing resources ensure pinout
retention as well as high utilization. It is ideal for PAL block device integration and a wide range
of other applications including high-speed computing, low-power applications, communications,
and embedded control. At each macrocell density point, Lattice offers several I/O and package
options to meet a wide range of design needs.
Advanced power management options allow designers to incrementally reduce power while
maintaining the level of performance needed for today’s complex designs. I/O safety features
allow for mixed-voltage design, and both the 3.3-V and the 5-V device versions are in-system
programmable through an IEEE 1149.1 Test Access Port (TAP) interface.
The Lattice Programmable Logic ICs series M5LV-512/120-7YI is CPLD - Complex Programmable Logic Devices PROGRAM HI DENSITY CPLD, View Substitutes & Alternatives along with datasheets, stock, pricing from Authorized Distributors at bitfoic.com,
and you can also search for other FPGAs products.
Features
◆ High logic densities and I/Os for increased logic integration
— 128 to 512 macrocell densities
— 68 to 256 I/Os
◆ Wide selection of density and I/O combinations to support most application needs
— 6 macrocell density options
— 7 I/O options
— Up to 4 I/O options per macrocell density
— Up to 5 density & I/O options for each package
◆ Performance features to fit system needs
— 5.5 ns tPD Commercial, 7.5 ns tPD Industrial
— 182 MHz fCNT
— Four programmable power/speed settings per block
◆ Flexible architecture facilitates logic design
— Multiple levels of switch matrices allow for performance-based routing
— 100% routability and pin-out retention
— Synchronous and asynchronous clocking, including dual-edge clocking
— Asynchronous product- or sum-term set or reset
— 16 to 64 output enables
— Functions of up to 32 product terms
◆ Advanced capabilities for easy system integration
— 3.3-V & 5-V JEDEC-compliant operations
— IEEE 1149.1 compliant for boundary scan testing
— 3.3-V & 5-V in-system programmable via IEEE 1149.1 Boundary Scan Test Access Port
— PCI compliant (-5/-6/-7/-10/-12 speed grades)
— Safe for mixed supply voltage system design
— Bus-Friendly Inputs & I/Os
— Individual output slew rate control
— Hot socketing
— Programmable security bit
◆ Advanced E2CMOS process provides high performance, cost effective solutions
◆ Supported by ispDesignEXPERT software for rapid logic development
— Supports HDL design methodologies with results optimized for MACH 5 devices
— Flexibility to adapt to user requirements
— Software partnerships that ensure customer success
◆ Lattice and Third-party hardware programming support
— LatticePRO software for in-system programmability support on PCs and Automated Test
Equipment
— Programming support on all major programmers including Data I/O, BP Microsystems, Advin,
and System General